Products
358 Double Vertical Anti-Scale Mesh
Closely spaced wire lets air flow through and allows visibility but is too narrow for fingers, toes or hand tools. The anti-scale properties combined with being very slow to cut make 358 the ultimate security mesh infill for fencing and...
from $479.00
358 Single Vertical Anti-Scale Mesh
Closely spaced wire lets air flow through and allows visibility but is too narrow for fingers, toes or hand tools. The anti-scale properties combined with being very slow to cut make 358 the ultimate security mesh infill for fencing and...
$190.00
Adjustable Driveway Gate
The Kinks Adjustable driveway gate is a super economic way to keep the dog and kids in. At 1.2m high and 1.8m wide they can be used for a 3.8m opening in a double swing configuration with standard gaps for...
from $207.00
Adjustable Drop Bolt Ground Stop
Strong surface mounted ground stop for double wing gates. Drop bolts with a maximum axle of Ø20 mm are the perfect fit. The Back stop position is adjustable to allow for different width gate frames and height adjustable to allow...
$70.00
Adjustable Socket
Adjustable Sockets are attached through the gate frame and provide a simple and convienent way to hinge your gate. They work with all of the Lynx 16mm or 20mm Gudgeon range
from $8.81
Aluminium Flag Drop Bolt
Pad-Lockable, Aluminium Flag Drop Bolt. Supplied with two lugs and two tubes that are welded to the gate prior to powder coating.
$81.10
Aluminium Gate Rebate Bearing Hinge
A hinge set consists of; 1 x top hinge and 1 x bottom hinge. Rebate bearing hinges fit inside the frame of the gate to achieve a clean minimalist finish with very low post to gate gaps. They are the...
$139.00
Aluminium In-Ground Fence Posts
Straight aluminum fence posts are designed to be concreted into the ground to support the panels of a fence or gate. They come in 50mm and 65mm square sections up to 2.5m long. All posts come with caps and can...
from $41.30
Aluminium Posts with Flange
Flanged aluminum fence posts are designed to be bolted onto a concrete pad or block wall to support the panels of a fence or balustrade. They come in 50mm and 65mm square sections up to 2.5m long. All posts come...
from $56.20
Aluminium U-Bracket 40x40 Rail
Aluminium U-brackets for fixing 40x40 rails to the fence post. The bracket is slotted vertically on both the post and rail holes. Accepts anti-tamper bolts, tek screws or pentaforce screws.
from $2.65
Aluminium U-Bracket 50x40 Rail
Aluminium U-brackets for fixing 50x40 rails to the fence post. The bracket is slotted vertically on both the post and rail holes. Accepts anti-tamper bolts, tek screws or pentaforce screws.
$6.20
Angle Guide Roller
Angle Guide Rollers are the best way to guide a gate from one side. The two rollers run against an equal angle section that is part of the gate frame. The rollers are horizontally adjustable so that one will run...
from $124.00
Anti-Theft Bracket
An Anti-Theft Bracket is attached to the gate post and used in conjunction with a Sliding Gate Catch. It provides a way of attaching the Catch and also stops the gate from being lifted off the track.
$36.70
Anti-Vandal Cover for M90 Photocells
Anti-Vandal covers for photocells are highly recommended for public installations such as driveways for parks, schools or commercial premises
Specifications
Suits Roger M90 photocells
Tough cover resists impact and protects the photocell
photocell sold separately
$105.00
Banana Latch
Banana Latches are an easy way to latch two rural swing gates together. Made from 10mm diameter hot dip galvanised steel, these latches will work on 25nb or 32nb steel farm gates.
$15.20
Barbed Wire
Barbed wire made from Bezinal 2000 wire from world leading Belgium company Bekaert. This wire is tested and proven to have the best possible corrosion performance and is most suited to New Zealand’s damp coastal climate. Bezinal 2000 uses a...
from $214.00
-
Zinc Alum
-
Black
Battery Backup Kit for 24v Swing Gate Motors
The battery backup for a gate motor allows it to open and close a few times in the event of a power outage. This kit is small and conveniently fits inside the control board box of the Roger 24v operators....
$366.00
Battery Backup Kit for 36v Gate Motors
The battery backup for a gate motor allows it to open and close a few times in the event of a power outage. This kit is small is in a separate IP66 Box that needs to be mounted near the...
$423.00
Battery Backup Kit for Barrier Arms
The battery backup for a barrier arm allows it to open and close a few times in the event of a power outage. This kit is small and conveniently fits inside the control cabinet of any Roger Bionik Barrier Arm....
$388.00
Battery Backup Kit for BH30 Medio Slide Gate Motor
The battery backup for a Roger Medio BH30 allows it to open and close a few times in the event of a power outage. This kit is small and conveniently fits inside the cover of the BH30 making it very...
$322.00
Beam for Bionik 4 Parking Barrier
The BA-68 is a lightweight replacement beam for Bionik-4 Parking Barriers. It has a rubber bumper strip on the bottom and can accept an led light strip along the top. The beam is easy to cut to length and quick...
$581.73
Beam for Bionik 4HP/6 Commercial Barrier
The BA-90 is a lightweight replacement beam for Bionik-4HP and Bionik-6 Commercial Barriers. It has a rubber bumper strip on the bottom and can accept an led light strip along each side. The beam is easy to cut to length...
from $475.96
Beam for Bionik-8 Industrial Barrier
The BA-128 is an ultra stong yet light weight replacement beam for Bionik-8 Industrial Barriers. It has a rubber bumper strip on the bottom and can accept an led light strip along the top. The beam comes in 4m lengths,...
$800.96
Bifold Gate Kit
Bifolding Gates are an amazing space saving invention as the gate arc is half that of a normal swing gate. This is especially important in driveways with limited space to the garage or where the car must turn sharply to...
from $1,352.00