MasterKlamp Logo
5.04 - Adjustable Male Swivel
MasterKlamp Pipe Clamp System is engineered for the simple, rapid assembly of tubular structures without the need for welding, bending or threading. No matter the complexity of the design, MasterKlamp enables quick, on-site construction. The modular design of MasterKlamp means...
from $6.35
Add to Favourites
5.10 - Female Hex Swivel
MasterKlamp Pipe Clamp System is engineered for the simple, rapid assembly of tubular structures without the need for welding, bending or threading. No matter the complexity of the design, MasterKlamp enables quick, on-site construction. The modular design of MasterKlamp means...
from $9.26
Add to Favourites
A.7.07.UNI - Handrail Saddle
MasterKlamp Pipe Clamp System is engineered for the simple, rapid assembly of tubular structures without the need for welding, bending or threading. No matter the complexity of the design, MasterKlamp enables quick, on-site construction. The modular design of MasterKlamp means...
$18.90
Add to Favourites
Pipe Clamp - 1.05 - Internal Swivel Tee Pipe Clamp
MasterKlamp Pipe Clamp System is engineered for the simple, rapid assembly of tubular structures without the need for welding, bending or threading. The internal swivel tee is designed to allow for 360° variable angle on structures. Normally used with MasterKlamp...
from $7.21
Add to Favourites
Pipe Clamp - Short Tee 1.02
MasterKlamp Pipe Clamp System is engineered for the simple, rapid assembly of tubular structures without the need for welding, bending or threading. The short tee (1.02) is used to connect two pipes in a T formation. 20nb-50nb available The modular...
from $5.09
Add to Favourites
Pipe Clamp 1.02 - Short Tee Capped
MasterKlamp Pipe Clamp System is engineered for the simple, rapid assembly of tubular structures without the need for welding, bending or threading. The capped short tee is designed to give a 90 degree butt joint between two pipes of differing...
$11.80
Add to Favourites
Pipe Clamp 1.03 - Short Tee 0-11°
MasterKlamp Pipe Clamp System is engineered for the simple, rapid assembly of tubular structures without the need for welding, bending or threading. The short tee 0-11°, allows two pipes to be joined at any selected angle between 0° and 11°....
from $8.39
Add to Favourites
Pipe Clamp 1.04 - Long Tee
MasterKlamp Pipe Clamp System is engineered for the simple, rapid assembly of tubular structures without the need for welding, bending or threading. The long tee is designed to give a 90° butt joint between two pipes. This fitting should be...
from $8.72
Add to Favourites
Pipe clamp 1.06 - Long Tee 0-11°
MasterKlamp Pipe Clamp System is engineered for the simple, rapid assembly of tubular structures without the need for welding, bending or threading. The long tee 0° to 11° allows two pipes to be joined at any selected angle between 0°...
from $11.80
Add to Favourites
Pipe clamp 1.07 - Adjustable Tee 30-60°
MasterKlamp Pipe Clamp System is engineered for the simple, rapid assembly of tubular structures without the need for welding, bending or threading. The adjustable tee 30° to 60° is used for struts and bracing in structures. It can be used...
from $9.15
Add to Favourites
Pipe Clamp 1.08 - Clamp On Tee
MasterKlamp Pipe Clamp System is engineered for the simple, rapid assembly of tubular structures without the need for welding, bending or threading. The clamp on tee is designed to give a 90° joint between two pipes. Because of the bolt...
from $9.47
Add to Favourites
Pipe Clamp 2.01 - Two Socket Cross
MasterKlamp Pipe Clamp System is engineered for the simple, rapid assembly of tubular structures without the need for welding, bending or threading. The two socket cross is designed to give a 90° joint between an upright and the middle rail...
from $7.86
Add to Favourites
Pipe Clamp 2.02 - Three Way Mid Corner
MasterKlamp Pipe Clamp System is engineered for the simple, rapid assembly of tubular structures without the need for welding, bending or threading. The three way mid corner is designed to give a 90° corner joint for the middle of any...
from $7.54
Add to Favourites
Pipe Clamp 2.03 - Three Way Top Corner
MasterKlamp Pipe Clamp System is engineered for the simple, rapid assembly of tubular structures without the need for welding, bending or threading. The three way top corner is designed to give a 90° corner joint for the top of any...
from $8.93
Add to Favourites
Pipe Clamp 2.04 - Two Socket Cross 30-45°
MasterKlamp Pipe Clamp System is engineered for the simple, rapid assembly of tubular structures without the need for welding, bending or threading. The two socket cross 30° to 45° is designed to give a variable joint between the upright and...
from $14.40
Add to Favourites
Pipe Clamp 2.05 - Side Outlet Cross
MasterKlamp Pipe Clamp System is engineered for the simple, rapid assembly of tubular structures without the need for welding, bending or threading. The side outlet cross is designed to connect the upright with the horizontal tubes in three directions, all...
from $11.10
Add to Favourites
Pipe Clamp 2.06 - Four Socket Cross
MasterKlamp Pipe Clamp System is engineered for the simple, rapid assembly of tubular structures without the need for welding, bending or threading. The four socket cross is designed to connect the upright with the horizontal tubes in four directions, all...
from $14.90
Add to Favourites
Pipe Clamp 2.08 - Crossover 90°
MasterKlamp Pipe Clamp System is engineered for the simple, rapid assembly of tubular structures without the need for welding, bending or threading. The crossover 90° is designed to give a 90° crossover joint. Normally used on guard rails and other...
from $6.35
Add to Favourites
Pipe Clamp 2.09 - Clamp-on Crossover 90°
MasterKlamp Pipe Clamp System is engineered for the simple, rapid assembly of tubular structures without the need for welding, bending or threading. The clamp-on crossover 90° is designed to give a 90° crossover joint between two pipes. Because of the...
from $6.35
Add to Favourites
Pipe Clamp 2.10 - Adjustable Swivel Cross
MasterKlamp Pipe Clamp System is engineered for the simple, rapid assembly of tubular structures without the need for welding, bending or threading. The adjustable swivel cross is designed to give a variable corner joint. It can be used at any...
from $13.30
Add to Favourites
Pipe Clamp 2.11 - Two Socket Cross 0-11°
MasterKlamp Pipe Clamp System is engineered for the simple, rapid assembly of tubular structures without the need for welding, bending or threading. The two socket cross 0° to 11° gives a variable joint angle between two pipe lengths from 0°...
from $11.10
Add to Favourites
Pipe Clamp 3.01 - Elbow 90°
MasterKlamp Pipe Clamp System is engineered for the simple, rapid assembly of tubular structures without the need for welding, bending or threading. The elbow 90° is designed to give a 90° elbow joint. Normally used as the end joint for...
from $5.92
Add to Favourites
Pipe Clamp 3.02 - Elbow 79-101°
MasterKlamp Pipe Clamp System is engineered for the simple, rapid assembly of tubular structures without the need for welding, bending or threading. The variable elbow 79° to 101° is designed as an elbow joint that can be locked at any...
from $8.72
Add to Favourites
Pipe Clamp 3.03 - Elbow 30-60°
MasterKlamp Pipe Clamp System is engineered for the simple, rapid assembly of tubular structures without the need for welding, bending or threading. The variable elbow 30° to 60° is designed as an elbow joint that can be locked at any...
from $8.72
Add to Favourites
You have successfully subscribed!