Split Tee
from $4.83
Split Tee
Split fittings are the easiest way to connect round posts and rails when building a chain link fence, tennis court or storage cage. The Lynx range of Tees, Crosses, Universal Fittings and Adjustable corners are made from mild steel and...
from $4.83
Add to Favourites
Split Cross
from $8.40
Split Cross
Split fittings are the easiest way to connect round posts and rails when building a chain link fence, tennis court or storage cage. The Lynx range of Tees, Crosses, Universal Fittings and Adjustable corners are made from mild steel and...
from $8.40
Add to Favourites
Split Fitting Adjustable Corner
Split fittings are the easiest way to connect round posts and rails when building a chain link fence, tennis court or storage cage. Adjustable corners are designed to give a 90° joint between vertical and horizontal pipes, but allow for...
from $10.08
Add to Favourites
Pipe Clamp 3.01 - Elbow 90°
MasterKlamp Pipe Clamp System is engineered for the simple, rapid assembly of tubular structures without the need for welding, bending or threading. The elbow 90° is designed to give a 90° elbow joint. Normally used as the end joint for...
from $6.16
Add to Favourites
Round Steel Post Cap
This knock on round Steel Post Cap is designed to fit externally over a round opening, such as pipe, to close off the open end.
from $6.72
Add to Favourites
Universal Post Clamp
Split fittings are the easiest way to connect round posts and rails when building a chain link fence, tennis court or storage cage. The Lynx range of Tees, Crosses, Universal Fittings and Adjustable corners are made from mild steel and...
from $7.85
Add to Favourites
Universal Rail Clamp
Split fittings are the easiest way to connect round posts and rails when building a chain link fence, tennis court or storage cage. The Lynx range of Tees, Crosses, Universal Fittings and Adjustable corners are made from mild steel and...
from $5.40
Add to Favourites
Universal Fitting Connector
Split fittings are the easiest way to connect round posts and rails when building a chain link fence, tennis court or storage cage. The Lynx range of Tees, Crosses, Universal Fittings and Adjustable corners are made from mild steel and...
$2.07
Add to Favourites
Round Flange for Round Pipe
Split fittings are the easiest way to connect round posts and rails when building a chain link fence, tennis court or storage cage. The Lynx range of Tees, Crosses, Universal Fittings and Adjustable corners are made from mild steel and...
from $8.07
Add to Favourites
Oval Flange for Round Pipe
Split fittings are the easiest way to connect round posts and rails when building a chain link fence, tennis court or storage cage. The Lynx range of Tees, Crosses, Universal Fittings and Adjustable corners are made from mild steel and...
from $3.32
Add to Favourites
Internal Pipe Sleeve
A pipe sleeve is used when joining two pieces of pipe.  These are designed to be a firm fit and require some force to secure it in place.
from $7.87
Add to Favourites
Centerband Wire Strainer
Centerband Wire Strainers use a bolt and bush with a hole in it to allow the fencesmith to tension fencing wire by turning the bolt. Made from hot dip galvanised steel.
from $5.51
Add to Favourites
Offset Centerband
Offset Centerbands are used in conjunction with a tensioning bar and shifts the mesh to the front of the posts. This method of straining a chainlink fence is fast and effective and eliminates the need for time consuming lacing. Made...
from $2.29
Add to Favourites
Centerband
from $4.37
Centerband
Centerbands are used in conjunction with a tensioning bar. This method of straining a chainlink fence is fast and effective and eliminates the need for time consuming lacing. Made from hot dip galvanised steel
from $4.37
Add to Favourites
Spike Razor Top
Spike razor top is an easy way to increase the security level of your fence or gate. It comes in 800mm lengths and is concave on the underside to allow it to also be attached to a pipe too. The...
from $31.50
Add to Favourites
Mesh Clip
from $0.35
Mesh Clip
Mesh clips in HDG steel used for connecting wire fence panels to the post. Available to suit 6.5mm and 8mm wire verticals.
from $0.35
Add to Favourites
Strainer Tag / Lockbox Tag
Hot dip galvanised tags to be welded on to strainer posts so that wire barbed or strainer wire can be attached to it.
$5.75
Add to Favourites
Aluminium U-Bracket 50x40 Rail
Aluminium U-brackets for fixing 50x40 rails to the fence post. The bracket is slotted vertically on both the post and rail holes. Accepts anti-tamper bolts, tek screws or pentaforce screws.
$5.67
Add to Favourites
Steel U-Bracket 40x40 Rail
The U-Bracket allows for the attachment of the fence panel at various angles to the post.
from $2.42
Add to Favourites
Aluminium U-Bracket 40x40 Rail
Aluminium U-brackets for fixing 40x40 rails to the fence post. The bracket is slotted vertically on both the post and rail holes. Accepts anti-tamper bolts, tek screws or pentaforce screws.
from $2.42
Add to Favourites
Cast Raking Bracket 40x40 Rail
Aluminium Tube-Brackets for fixing 40x40 rails to the fence post. Allows for rakes up to 15 deg. The advantage of tube brackets is that they allow for variations in width by hiding the end of the rail. Accepts tek screws...
from $2.53
Add to Favourites
Cast Bracket 38x25 Rail
Aluminium Tube-Brackets for fixing 38x25 rails to the fence post. The advantage of tube brackets is that they allow for variations in width by hiding the end of the rail. Accepts tek screws or pentaforce screws.
from $1.90
Add to Favourites
Pallet Feet
Pallet Feet are used on the legs of pallets, thus allowing them to be safely and securely stacked.  Pallet Feet are black, un-galvanised steel. 
$7.85
Add to Favourites
Square Aluminium Flange
Square Aluminium Flange for welding to the bottom or side of a length of aluminium. Use 125mm flanges for 50shs and 150mm flanges for 65shs posts.
from $14.90
Add to Favourites
You have successfully subscribed!