Adjustable Socket
Adjustable Sockets are attached through the gate frame and provide a simple and convienent way to hinge your gate. They work with all of the Lynx 16mm or 20mm Gudgeon range
from $8.81
Add to Favourites
Aluminium Flag Drop Bolt
Pad-Lockable, Aluminium Flag Drop Bolt. Supplied with two lugs and two tubes that are welded to the gate prior to powder coating.
$94.00
Add to Favourites
Angle Guide Roller
Angle Guide Rollers are the best way to guide a gate from one side. The two rollers run against an equal angle section that is part of the gate frame. The rollers are horizontally adjustable so that one will run...
from $124.00
Add to Favourites
Anti-Theft Bracket
An Anti-Theft Bracket is attached to the gate post and used in conjunction with a Sliding Gate Catch. It provides a way of attaching the Catch and also stops the gate from being lifted off the track.
$36.70
Add to Favourites
Banana Latch
Banana Latches are an easy way to latch two rural swing gates together. Made from 10mm diameter hot dip galvanised steel, these latches will work on 25nb or 32nb steel farm gates.
$15.20
Add to Favourites
Big Bearing Gate Hinge
NOTE: These hinges are made to order. Bearing Hinges are the best way to hang an automated gate. The low friction movement reduces noise and wear on the gate and motor. The Bottom Hinge has a tapered thrust bearing that...
$1,200.00
Add to Favourites
Centerband
from $4.77
Centerband
Center bands are used in conjunction with a tensioning bar. This method of straining a chainlink fence is fast and effective and eliminates the need for time consuming lacing. Made from hot dip galvanised steel.
from $4.77
Add to Favourites
Centerband Gudgeon
Centerband Gudgeons are used to hang a light weight pipe and mesh gate to a round post. Rated to 150kg on a 1:1 height to width gate. NOT rated to use on automated gates.
from $9.79
Add to Favourites
Centerband Wire Strainer
Centerband Wire Strainers use a bolt and bush with a hole in it to allow the fencesmith to tension fencing wire by turning the bolt. Made from hot dip galvanised steel.
from $6.02
Add to Favourites
Chain Link Mesh
TWIST TOP mesh now available on request (POA). Lynx chainlink mesh is manufactured in New Zealand using a Bergandi chain link mesh weaver from the USA. It produces tight knuckles which ensure a deformation resistant mesh. Our Galv mesh is...
from $9.58
Add to Favourites
Compression Insert for Adjustable Socket
Compression Inserts are welded into the gate frame to give it strength where the hinges are attached. They are designed to be used with a M16 socket hinge (SA16-100). 100mm sockets are partially threaded, allowing them to be used where...
from $50.96
Add to Favourites
Double Swing Gate Catch
The Double Swing Gate Catch is an easy way to latch two gates that meet together in the middle. Made from aluminium and using stainless steel fasteners, this latch will never rust and look good for years. A simple elegant...
$60.30
Add to Favourites
Drive Gudgeon
Drive in gudgeon hinges for rural swing gates are great for hanging a gate to from a large stump or timber post.
$12.70
Add to Favourites
Drop Bolt
from $15.20
Drop Bolt
Economical pad-lockable drop bolt in hot dip galvanised steel. Available in 300mm and 700mm lengths.
from $15.20
Add to Favourites
Drop Bolt for Round Frame
Pad-Lockable Drop Bolt swing gates with round frames. 400mm long in hot dip galvanised steel.
$7.96
Add to Favourites
Fence Post 40nb, 50nb for Chain Link
Pre-made 40nb and 50nb round posts for 1.8m chain link fencing are now in stock. 3m long posts with 6 hole for 1.8m mesh with 3 lines of barbed wire or 3 hole They are a great quality post with...
from $65.00
  • HDG
  • Black
Add to Favourites
Field Gate Hook Catch
Farm Gate Hook Catch and Staple with spring clip or ring.
from $1.64
Add to Favourites
Gate Clamp Hinge
Clamp Hinges are desinged for rural pipe gates. They lock onto the frame of the gate and elminiate the need for welded sockets. Used in conjunction with gudgeon type hinges. Availbe to suit 20nb and 25nb gate frames.
from $4.51
Add to Favourites
Gate Nose
The Gate Nose bolts onto the leading edge of your gate to guide it smoothly and quietly into the end catch and prevent scratching. Used with Lynx End Catches
$11.00
Add to Favourites
Gate Safety Cable
Gate Safety Cables stops a swing gate from falling to the ground in the event that the hinges are damaged. It is recommended to install these on all swing gates above 1.8m high in public places in order to prevent...
from $60.30
Add to Favourites
Heavy Duty Bearing Roller
These Heavy Duty Guide Rollers feature a machined M16 Stainless Steel shaft with two stainless steel concealed roller bearings. The ultimate guide roller for industrial applications.
$60.30
Add to Favourites
Heavy Duty Roller Assembly with O-Rings
The Heavy Duty Roller Assembly with O-Rings is suitable for gates of up to 100mm wide frames and is used in conjunction with Lynx Stainless Steel Bearing O-Ring Rollers.
from $31.40
Add to Favourites
Hinge Strap
from $3.89
Hinge Strap
Strap Hinges for Timber Rural Gates. Available to suit 16mm and 20mm pin gudgeons and from 150mm right up to 600mm long.
from $3.89
Add to Favourites
Industrial Drop Bolt
Pad-Lockable, hot dip galvanised Industrial Drop Bolt for pipe and mesh gates. Supplied with three lugs. Extra lugs sold separately.
from $20.30
Add to Favourites
You have successfully subscribed!