Lynx Hardware
Lynx Hardware started off with a few pressed metal fittings, mostly post caps and pipe clamps for chain link fencing, being bashed out in a small New Zealand shed. Now it's so much more.
Sliding Gate End Stop
Sliding Gate End Stops in either Bolt on or weld-on. Hot Dip Galvanised Steel bracket and rubber bumper.
from $23.90
Pallet Feet
Pallet Feet are used on the legs of pallets, thus allowing them to be safely and securely stacked.
Pallet Feet are black, un-galvanised steel.
$8.58
Square Flange for Round Pipe
Split fittings are the easiest way to connect round posts and rails when building a chain link fence, tennis court or storage cage. The Lynx range of Tees, Crosses, Universal Fittings and Adjustable corners are made from mild steel and...
from $8.58
Round Flange for Round Pipe
Split fittings are the easiest way to connect round posts and rails when building a chain link fence, tennis court or storage cage. The Lynx range of Tees, Crosses, Universal Fittings and Adjustable corners are made from mild steel and...
from $8.82
Drop Bolt for Round Frame
Pad-Lockable Drop Bolt swing gates with round frames. 400mm long in hot dip galvanised steel.
$7.96
Square Steel Flange
All purpose Square Steel Flange are used to secure (by welding) any steel surface to its fixable flange surface.
Available in black steel or hot dip galvanised.
from $7.59
Internal Pipe Sleeve
A pipe sleeve is used when joining two pieces of pipe. These are designed to be a firm fit and require some force to secure it in place.
from $8.60
Strainer Tag / Lockbox Tag
Hot dip galvanised tags to be welded on to strainer posts so that wire barbed or strainer wire can be attached to it.
$6.28
Razor Wire Ring
Lynx Long Barb Razor Wire Rings are the ultimate high security fence top deterrent. Made from high tensile steel tape with wire running up the center it is extremely sharp and hard to cut. The only made in NZ razor...
from $6.18
Rectangular Steel Flange
Rectangular steel flanges for welding to 50shs sections. Suit applications where there is not space to use a four hole flange, such as on nib walls.
$6.02
Centerband Wire Strainer
Centerband Wire Strainers use a bolt and bush with a hole in it to allow the fencesmith to tension fencing wire by turning the bolt. Made from hot dip galvanised steel.
from $6.02
Aluminium U-Bracket 50x40 Rail
Aluminium U-brackets for fixing 50x40 rails to the fence post. The bracket is slotted vertically on both the post and rail holes. Accepts anti-tamper bolts, tek screws or pentaforce screws.
$6.20
Universal Rail Clamp
Split fittings are the easiest way to connect round posts and rails when building a chain link fence, tennis court or storage cage. The Lynx range of Tees, Crosses, Universal Fittings and Adjustable corners are made from mild steel and...
from $5.90
Thru Post Gudgeon
Thru Post gudgeon hinges for industrial swing gates are a strong and cost effective way to hang a big gate. Rated up to 350kg for a 1:1 height to width ratio gate.
from $4.91
Shoot Bolt
Shoots Bolts are welded to the inside of a gate during manufacture and offer a reliable, cost effective and lockable solution to keep a gate closed.
from $5.90
Gate Clamp Hinge
Clamp Hinges are desinged for rural pipe gates. They lock onto the frame of the gate and elminiate the need for welded sockets. Used in conjunction with gudgeon type hinges. Availbe to suit 20nb and 25nb gate frames.
from $4.51
Universal Post Clamp
Split fittings are the easiest way to connect round posts and rails when building a chain link fence, tennis court or storage cage. The Lynx range of Tees, Crosses, Universal Fittings and Adjustable corners are made from mild steel and...
from $8.58
Universal Fitting Connector
Split fittings are the easiest way to connect round posts and rails when building a chain link fence, tennis court or storage cage. The Lynx range of Tees, Crosses, Universal Fittings and Adjustable corners are made from mild steel and...
$2.27
Split Tee
Split fittings are the easiest way to connect round posts and rails when building a chain link fence, tennis court or storage cage. The Lynx range of Tees, Crosses, Universal Fittings and Adjustable corners are made from mild steel and...
from $5.28
Centerband
Center bands are used in conjunction with a tensioning bar. This method of straining a chainlink fence is fast and effective and eliminates the need for time consuming lacing. Made from hot dip galvanised steel.
from $4.77
Oval Flange for Round Pipe
Split fittings are the easiest way to connect round posts and rails when building a chain link fence, tennis court or storage cage. The Lynx range of Tees, Crosses, Universal Fittings and Adjustable corners are made from mild steel and...
from $3.63
Screw Gudgeon
Screw Gudgeons are screwed into a wooden fence post (after drilling a pilot hole), and allow a gate with an attached socket to slip over the protruding gudgeon. Long pin gudgeons have an additional hole at the top of the...
from $2.89
Hinge Strap
Strap Hinges for Timber Rural Gates. Available to suit 16mm and 20mm pin gudgeons and from 150mm right up to 600mm long.
from $3.89
Temporary Fence Clamp
Temporary Fence Clamps are used to secure pipe lengths in parallel to each other. Typically these are used to secure temporary fence panels.
from $3.63