Skip to content
All prices NZD and Ex-GST
Announce something here

Cart

Your cart is empty

Article: What Size Post and Hinges Do You Need

What Size Post and Hinges Do You Need

Choosing the right size post and hinges for your gate depends on four things:

Gate Weight

Heavy gates need stronger hinges and posts of course. Try to make your gates strong but light by using aluminium over steel and tubular sections over solid ones. Larger thin wall sections also add to rigidity without adding much weight. 65x3mm SHS will be stronger and lighter than 50x5mm SHS for example. For timber gates you also need to consider whether they will take on water. A waterlogged gate is super heavy and can blow out a set of hinges in no time. 

Height to Width Ratio

Ever tried holding an extended ladder sideways rather than upright - its a lot harder right? The ratio of height to width makes a big difference to your hinge selection too. Wide gates need higher rated hinges. This simple table will help you to chose the right size hinges. Multiply your gate weight by the factor in the table to get an Effective Gate Weight.

Height to Width Ratio 1 : 1 1 : 1.5 1 : 2 1 : 2.5 1 : 3
Gate Weight Multiplier 1x 1.5x 2x 2.5x 3x

 

Is the gate automated

Linear gate operators put a huge amount of sizeways force on the hinges. Consider the Roger Smarty-4 for example. Its max thrust is 4500N or 450kg. Most of that force is being driven back into the hinges in order to get the gate moving. This needs to be added to the existing weight of your gate. Having a hinge design that is designed to take sideways loads in addition to downward ones is strongly recommended. Hinges with a tapered thrust bearing on the bottom such as the Cais and Lynx bearing hinges should be used for heavy automated gates. And super heavy gates should use an articulated gate operator to reduce the force on the hinges. 

What is the potential wind load

 Wind load is a consideration for gates with a high percentage infill. Heavy steel gates with perforated sheet steel or similar infill should have a little extra strength added to the posts and hinges. 

Post Size Selector

Many a nice gate is let down by being swung from too light a post. Use the table below to determine your post size. Use steel over aluminium and use a wall flange where possible. And for concrete in posts make sure your hole size and reinforcing are sufficient for your soil type.

Weight Per Leaf 40 kg 50 kg 100 kg 150 kg 200 kg 300 kg
Post 65x3mm 75x3mm 100x3mm 125x4mm 150x5mm 200x5mm

 

For help to choose the right posts and hinges for your gate please give us a call so we can make more detailed engineering calculations for your set up.

Read more

Ten Reasons to Install Rural Electric Fence

If you have any sort of animal in your care, at some stage or another you will be thinking about fencing and security. When animals escape it costs us both money and time; the easiest solution is ...

Read more

3 Reasons to use TonkaTrak Aluminium Cantilever Gate System

TonkaTrak is all about engineered extrusions and precision hardware that can be seamlessly integrated to create elegant gates. Remember when aluminium windows were cobbled together from off-the- s...

Read more