Roger Automation
Anti-Vandal Cover for M90 Photocells
Anti-Vandal covers for photocells are highly recommended for public installations such as driveways for parks, schools or commercial premises
Specifications
Suits Roger M90 photocells
Tough cover resists impact and protects the photocell
photocell sold separately
$105.00
Battery Backup Kit for 24v Swing Gate Motors
The battery backup for a gate motor allows it to open and close a few times in the event of a power outage. This kit is small and conveniently fits inside the control board box of the Roger 24v operators....
$366.00
Battery Backup Kit for 36v Gate Motors
The battery backup for a gate motor allows it to open and close a few times in the event of a power outage. This kit is small is in a separate IP66 Box that needs to be mounted near the...
$423.00
Battery Backup Kit for Barrier Arms
The battery backup for a barrier arm allows it to open and close a few times in the event of a power outage. This kit is small and conveniently fits inside the control cabinet of any Roger Bionik Barrier Arm....
$388.00
Battery Backup Kit for BH30 Medio Slide Gate Motor
The battery backup for a Roger Medio BH30 allows it to open and close a few times in the event of a power outage. This kit is small and conveniently fits inside the cover of the BH30 making it very...
$322.00
Beam for Bionik 4 Parking Barrier
The BA-68 is a lightweight replacement beam for Bionik-4 Parking Barriers. It has a rubber bumper strip on the bottom and can accept an led light strip along the top. The beam is easy to cut to length and quick...
$581.73
Beam for Bionik 4HP/6 Commercial Barrier
The BA-90 is a lightweight replacement beam for Bionik-4HP and Bionik-6 Commercial Barriers. It has a rubber bumper strip on the bottom and can accept an led light strip along each side. The beam is easy to cut to length...
from $475.96
Beam for Bionik-8 Industrial Barrier
The BA-128 is an ultra stong yet light weight replacement beam for Bionik-8 Industrial Barriers. It has a rubber bumper strip on the bottom and can accept an led light strip along the top. The beam comes in 4m lengths,...
$800.96
BR21 - 360 deg kit
This chain driven arm adapts the Roger BR21 submerged swing gate operator to allow it to swing the gate up to 360 deg.
$464.42
Controller for RGB LED strip
Controller that is used to configure the RGB LED strip light for the Bionik barriers.
[custom tab]
Edgesmith's technicial support provides you with the support you need to have confidence when specifying or installing Roger Automation.
Download Manual
[/custom tab]
$309.00
End Support for Barrier Arm
Support the end of your barrier arm with a fixed End Support. Availble in three options - fixed height, adjustable height, and adjustable height with built in mag lock. Magnetic Locking version recommended for >6m barriers [custom tab] Edgesmith's technicial...
from $245.00
LED Strip for Barrier Arm
The LED is a led lighting strip that can be fitted to any Roger Bionik Barrier Arm to make the beam flash when opening or closing. An essential addition to high-traffic and public installations. The strip is threaded inside the...
from $218.27
M90 Hardwired Photocells
Roger M90 safety photocells prevent the gate from closing on a car. They are adjustable 15deg vertically (so you can mount them the same height off the ground on a sloping driveway) and 270 deg horizontally so you can mount...
$204.00
Mag Lock End Support for Barrier Arm
Support the end of your barrier arm with an adjustable height End Support with built in mag lock. Magnetic Locking Supports recommended for 6m+ barriers [custom tab] Edgesmith's technicial support provides you with the support you need to have confidence...
$746.00
Multi-coloured LED Strip for Barrier Arm
The Multi-coloured LED is a led lighting strip that can be fitted to any Roger Bionik Barrier Arm to make the beam flash different colours when opening or closing. Configuring the RGB LED with the B73-LTM allows the barrier arm...
from $297.00
Nylon Gear Rack
High quality 6-LUG nylon gear rack for automated sliding and cantilever gates weighing up to 800kg (on level ground) and 1200kg for heavy gates. Available with standard downward facing lugs or upward facing lugs for cantilever gates. Using the up-lugs...
from $33.50
Pendulum End Support for Barrier Arm
Support the end of your barrier arm with a Pendulum End Support. This attaches to the end of your barrier beam and is the best option when a fixed support is likely to be in the way. [custom tab] Edgesmith's...
$278.00
Pendulum Extension for Barrier Arm
Extend the length of the Pendulum End Support by adding this 210mm extension. Necessary if the driveway slopes away from the Barrier Operator. [custom tab] Edgesmith's technicial support provides you with the support you need to have confidence when specifying...
$58.94
Radio Receiver for Roger
The Plug In Receiver plugs directly into the board of Roger control boards. It receives the signals of Roger remote controls and wireless keypads used to control the automatic operation of gates, doors and barriers. A Stand Alone Receiver can...
from $111.00
Replacement Roger Control Boards
Replacement Roger control boards, please select the correct board. Each board is labelled on the large capacitor. [custom tab] Edgesmith's technicial support provides you with the support you need to have confidence when specifying or installing Roger Automation. Control board...
from $547.00
Roger BE20 Presto 200kg Swing Gate Motor
The BE20-200-HS is a swing gate operator for gates of up to 300kg /2.5m per leaf. The powerful 36v brushless motors are capable of opening times as low as 15 sec on a large gate and can be operated up...
from $1,487.00
Roger BE20 Presto 400kg Swing Gate Motor
The BE20-400 is a swing gate operator for gates of up to 400kg /4m per leaf. The powerful 36v brushless motors are capable of opening times as low as 17 sec on a large gate and can be operated up...
from $1,928.00
Roger BG30 Grande 1500kg Sliding Gate Motor
The Roger Grande BG30-1504 is a powerful sliding gate operator capable of moving gates of up to 1500kg at speeds of 25m/m. It has a compact 36v brushless motor that is capable of 100% duty cycle and has the smoothest...
from $2,696.00
Roger BH23 Articolato 250kg Swing Gate Motor
The Roger Articolato BH23 is an articulated swing gate operator for gates of up to 250kg or 3m per leaf. The powerful 24v brushless motors are capable of opening times as low as 12 sec on a large gate and...
from $2,293.00