Lynx Hardware
Lynx Hardware started off with a few pressed metal fittings, mostly post caps and pipe clamps for chain link fencing, being bashed out in a small New Zealand shed. Now it's so much more.
Wire Bag Ties
Wire Bag Ties suitable for securing bags and also a great alternative for chain link fencing when joining the chain link to the post structure. Bundles of 500. 150mm - 25nb pipe 200mm - 32nb pipe 230mm - 40nb pipe...
from $18.90
Lock Thru Gudgeon
Lock Thru gudgeon hinges for industrial and rural swing gates are a strong and cost effective way to hang a gate. The locking bar both increases the strength and stops it from twisting during installation. Rated up to 350kg for...
from $18.90
Pad Bolt
Pad Bolts are designed for industrial swing gates and have a tab on the bolt with a hole designed to take a padlock. Made from hot dip galvanised steel.
$17.70
Square Aluminium Flange
Square Aluminium Flange for welding to the bottom or side of a length of aluminium. Use 125mm flanges for 50shs and 150mm flanges for 65shs posts.
from $16.30
Banana Latch
Banana Latches are an easy way to latch two rural swing gates together. Made from 10mm diameter hot dip galvanised steel, these latches will work on 25nb or 32nb steel farm gates.
$15.20
Drive Gudgeon
Drive in gudgeon hinges for rural swing gates are great for hanging a gate to from a large stump or timber post.
$12.70
Screw Plate Gudgeon
Screw Plate Gudgeons are a simple and effective way of hinging your gate. Available in 2 sizes: 16mm pin for gates up to 200kg and 20mm pin for gates up to 300kg. Used in conjunction with Lynx Adjustable Sockets.
from $11.40
Drop Bolt
Economical pad-lockable drop bolt in hot dip galvanised steel. Available in 300mm and 700mm lengths.
from $15.20
Gate Nose
The Gate Nose bolts onto the leading edge of your gate to guide it smoothly and quietly into the end catch and prevent scratching. Used with Lynx End Catches
$11.00
Split Fitting Adjustable Corner
Split fittings are the easiest way to connect round posts and rails when building a chain link fence, tennis court or storage cage. Adjustable corners are designed to give a 90° joint between vertical and horizontal pipes, but allow for...
from $11.00
Centerband Gudgeon
Centerband Gudgeons are used to hang a light weight pipe and mesh gate to a round post. Rated to 150kg on a 1:1 height to width gate. NOT rated to use on automated gates.
from $9.79
D-Latch
D-Latches are the most cost effective way to latch a small pedestrian gate. Availible in round post and square post variants in hot dip galvanised steel.
$9.30
Square Flange for Square Tube
The Square Flange enables you to quickly weld SHS in place. Then you can bolt down the flange to your surface.
$9.17
Overhead Guide Roller Bracket
The Overhead Guide Roller Bracket is suitable for gates of up to 75mm wide frames and is used in conjunction with Lynx Nylon Rollers.
$9.06
Adjustable Socket
Adjustable Sockets are attached through the gate frame and provide a simple and convienent way to hinge your gate. They work with all of the Lynx 16mm or 20mm Gudgeon range
from $8.81
Pallet Feet
Pallet Feet are used on the legs of pallets, thus allowing them to be safely and securely stacked.
Pallet Feet are black, un-galvanised steel.
$8.58
Square Flange for Round Pipe
Split fittings are the easiest way to connect round posts and rails when building a chain link fence, tennis court or storage cage. The Lynx range of Tees, Crosses, Universal Fittings and Adjustable corners are made from mild steel and...
from $8.58
Round Flange for Round Pipe
Split fittings are the easiest way to connect round posts and rails when building a chain link fence, tennis court or storage cage. The Lynx range of Tees, Crosses, Universal Fittings and Adjustable corners are made from mild steel and...
from $8.82
Drop Bolt for Round Frame
Pad-Lockable Drop Bolt swing gates with round frames. 400mm long in hot dip galvanised steel.
$7.96
Square Steel Flange
All purpose Square Steel Flange are used to secure (by welding) any steel surface to its fixable flange surface.
Available in black steel or hot dip galvanised.
from $7.59
Internal Pipe Sleeve
A pipe sleeve is used when joining two pieces of pipe. These are designed to be a firm fit and require some force to secure it in place.
from $8.60
Strainer Tag / Lockbox Tag
Hot dip galvanised tags to be welded on to strainer posts so that wire barbed or strainer wire can be attached to it.
$6.28
Razor Wire Ring
Lynx Long Barb Razor Wire Rings are the ultimate high security fence top deterrent. Made from high tensile steel tape with wire running up the center it is extremely sharp and hard to cut. The only made in NZ razor...
from $6.18
Rectangular Steel Flange
Rectangular steel flanges for welding to 50shs sections. Suit applications where there is not space to use a four hole flange, such as on nib walls.
$6.02